浅议物理实验教学环节改革

为进一步提高大学物理实验的教学质量，本文就实验课的预习、操作、实验报告的撰写及考核方法进行了探讨。     

管肋式辐射器排热特性的数值分析与优化设计

为得到按单面辐射方式布置的管肋式空间辐射器的排热特性，建立了相应的数学模型．采用数值模拟方法分析了管内流体温度、肋片几何尺寸和等效热沉温度对辐射器排热特性的影响，得到了不同参数值下辐射器单位面积排热量以及特定参数范围内的辐射器肋片最佳宽度和肋片效率．数值模拟结果对辐射器的工程结构设计以及空间站热管理方案的优化分析具有一定的参考价值．     

RPC读出条的阻抗匹配

文章对高阻板探测器读出条的阻抗匹配问题进行了研究;引入了一个用于计算带状线特性阻抗的经验公式.测量的特性阻抗与经验公式很好地符合,说明这个经验公式可以用于RPC读出条特性阻抗的计算,以改善RPC读出信号的质量,利于RPC探测器性能的测量.     

Photorefractive shearing interferometer

A novel method of obtaining shearing interferogram by slightly moving the crystal in a photorefractive interferometer is proposed. This method can measure the phase of an object itself instead of its diffraction field, and it is easy to realize continuously changeable shearing distance in any lateral direction and introduce carrier fringes at the same time. Both the theoretical analysis and experimental verification are given.     

Experimental investigation of the aquatic propulsion caused by localised flexural wave propagation in immersed wedges and plates

This paper describes the results of the experimental verification of the idea of wave-like aquatic propulsion of autonomous and man-inhabited vessels first published about 10 years ago by one of the present authors (V.V.K.). The idea is based on employing the unique type of localised flexural elastic waves propagating along edges of wedge-like structures immersed in water (wedge elastic waves). Such wedge-like structures supporting localised elastic waves can be attached like fish fins to a body of a small ship or a submarine and used for their propulsion. The proposed principle of employing localised flexural waves as a source of aquatic propulsion has been biologically inspired by the specific swimming mode used in nature by stingrays. To verify the idea experimentally, the first working prototype of a small catamaran using the above-mentioned wave-like propulsion via the attached rubber keel has been build and tested in Loughborough University. The tests have been carried out in two phases, in a water tank and then in open water. The test results have shown that the catamaran was propelled very efficiently and could achieve the speed of 36 cm/s, i.e., about one vehicle length per second, thus demonstrating that the idea of wave-like propulsion of small man-inhabited craft is viable. The reported proof of the viability of this idea may open new opportunities for marine craft propulsion, which can have far reaching implications.     

Theory and Application of Characteristic Finite Element Domain Decomposition Procedures for Coupled System of Dynamics of Fluids in Porous Media

For a coupled system of multiplayer dynamics of fluids in porous media,the characteristic finiteelement domain decomposition procedures applicable to parallel arithmetic are put forward.Techniques suchas calculus of variations,domain decomposition,characteristic method,negative norm estimate,energy methodand the theory of prior estimates are adopted.Optimal order estimates in L~2 norm are derived for the error inthe approximate solution.     

Algorithms for finding proper essential surfaces in 3-manifolds

In this paper, we present an algorithm which, for a given compact orientable irreducible boundary irreducible 3-manifold M, verifies whether M contains an essential orientable surface (possibly, with boundary), whose genus is at most N. The algorithm is based on Haken’s theory of normal surfaces, and on a trick suggested by Jaco and consisting in estimating the mean length of boundary curves in an unknown essential surface of a given genus in the given manifold.     

抛物面式太阳能聚能系统聚光特性模拟

结合集热器的光学特性,本文应用蒙特卡罗法对理想的槽型和碟型两种抛物面集热器在不同焦距、不同边缘角时焦面上的热流密度进行了计算,获得了焦距、边缘角和聚光比之间的关系。在考虑太阳不平行度、跟踪指向误差、镜面的反射误差条件下,对碟型抛物面太阳能聚能系统的辐射特性进行了数值模拟分析,获得了吸收器壁面热流分布以及边缘角对焦面热流分布的影响,为太阳能聚能系统的设计和安装提供参考依据。     

定位定量检测光电内窥系统

本文分析定位定量窥测系统设计中普遍存在的问题,提出一种检测方案,并预示窥测仪器的发展趋势。     

Recognition of ring pairs in the data analysis of Cherenkov detectors

We present a new algorithm for the identification of ring pairs in Cherenkov detectors. The approach combines linear regression methods for the construction of an appropriate reference quantity, methods from statistics for the evaluation of hypotheses and Monte Carlo simulation runs for the tuning of threshold levels.